Chain Link Fence
Chain link fencing is used in all types of fence installations from residential to commercial and can be installed to look aesthetically pleasing along with secure the perimeter of your property. Arizona Fence Builders used high quality gauged metal so you get a secure chain link fence that will last for many years without much maintenance.
A chain-link fence is popular because they are usually affordable, practical and the maintenance is easy. Also known as the cyclone, hurricane or diamond-mesh fences, chain-link fences are made by weaving a metal wire in a diamond shape.
Chain-link fences are the least expensive of all fences, priced much lower than wooden, aluminum, wrought-iron or vinyl fences. The styling of chain link has become even better over the years, as there are many new variations of panels and inserts that you can have installed to give you privacy and curb appeal.
Fabric comes in a variety of gauges. Gauge is the diameter of the wire; the higher the gauge number the smaller the wire diameter. Standard mill diameter tolerance is or – .005”. Common gauges and diameters are as follows:
• 6 gauge=.192”
• 9 gauge=.148”
• 11 gauge=.120”
• 11 ½ gauge=.113”
• 12 gauge=.106”
• 12 ½ gauge=.099
Chain link fabric is available in heights of 36”, 42”, 48”, 60”, 72”, 84”, 96”, 120”, and 144”. The fabric is formed by weaving a series of spirals together. How the top and bottom of fence is finished is referred to as the selvage. Fences less than 72″ must knuckle both ends by industry standard (KK). Heights of 72” and higher, are generally twisted or barbed at one end and knuckled (BK) on the other.
For high security enclosures, chain link can be obtained with both ends twisted or barbed (BB). Zinc coatings may also differ. There are two different processes for applying zinc to wire. Galvanized after weaving (G.A.W.) is a process in which wire rod is drawn to the finished gauge, then woven into chain link fabric. The fabric is then pulled through a pot of molten zinc. This process applies 1.2 ounces of zinc coating per square foot of fabric and conforms to ASTM standards. The other process for applying zinc coating to chain link is called galvanized before weaving (G.B.W.). In this process the wire rod is drawn to gauge, and the strand wire is then pulled through a pot of molten zinc. The wire is then woven into chain link fabric.
Generally chain link fabric made using this process carries a zinc weight of .8 ounces per square foot or less. The distance between two parallel wires in the fabric is referred to as the mesh size. The most common mesh sizes are 2” or 2 1/4″, but smaller meshes of 3/8”, 5/8”, 1”, 1 1/4”, 1 1/2″ and 1 3/4″ are available for projects that require a higher degree of security. The quality of chain link fence fabric is determined by both the gauge of the wire and the weight of the zinc coating applied to the wire. The American Society for testing material has established standards for residential and commercial chain link fence fabric under designation A 392-96.
Frame work is the tubular steel frame that chain link fabric is attached to. The frame work is comprised of three components; top rail, line posts, and terminal posts. Terminal posts are set in concrete and are end, corner, and gate posts. Line posts are smaller in diameter than terminal posts and are the intermediate posts between terminal posts. These should also be set in concrete. The top rail is attached to the terminal posts and passes through fittings which are attached to line posts. This provides a horizontal frame that supports that fabric.
The chain link fence frame work is also zinc coated to provide protection against corrosion. There are two methods of coating tubular products. In the first method, coils of steel are slit to the proper width, then formed into pipe and the seam is welded. After the pipe is formed, the pipe is then taken to a pot of molten zinc and submersed. Both the interior and exterior of the pipe are zinc coated. This method is referred to as the hot dip process. In the second method, the slit to width coil of steel is formed into pipe and then seam welded.
The pipe then passes through an in line vat of molten zinc, which coats the exterior with zinc. A clear organic coating is applied over the zinc, providing additional protection from corrosion. The interior of the tubing is coated with a zinc rich paint. This method is referred to as in line, flow coat galvanizing. Both methods of manufacturing conform to ASTM F669-92. The quality of tubular products is relative to the thickness of steel, as well as the zinc coating.
Please refer to chart one for further information on tubular products and typical applications. What are fittings and how are they used? To assemble a chain link fence systems several types of fittings are required. Fittings can be classified into three types; those used in the line of fence, those used on terminal posts, and those used in conjunction with gates. All residential fittings are made from a die cast aluminum or steel that has been galvanized. Industrial and commercial fittings are made from galvanized steel, cast iron, or malleable steel.
Fittings are an integral part of the fence, as they secure the components of the fence system. Gate fittings are especially important. The gate is the only part of the fence that moves and that people come into contact with on a regular basis. It is very important that they fit and do not move on the gate post once installed. This will keep the gate from sagging. For security, barbed wire can be added to all types of commercial projects. Fittings should conform to ASTM F 626-96.
For residential applications two types of gates are commonly used; single walk and double drive. Single walk gates are generally used for people to pass through, although they can be made up to 12’ wide and are always the same height as the fence. It is a single panel that is hinged from one terminal post and latched to another. Double drive gates consist of two panels that latch in the middle of the opening. Both single walk and double drive gates for residential enclosures are made from 1 3/8” diameter tubing. Bent frames with rounded corners, aluminum ell corners, and square welded corners are also available.
The quality of the chain link and frame work used should match the rest of the fence. Automatic closing mechanisms are available to shut and latch the single walk gate after passage. Are there different types of gates for commercial projects? In addition to single walk and double drive gates, several types of sliding gates are available for commercial and high security applications. Sliding gates are used where there is no room to swing the panel of a single or double gate. In areas where snow and ice are not a problem rolling gates are not recommended.
Rolling gates roll on a pipe track that is attached by track brackets to the gate post and line posts and is on a ground carrier that is attached to the front of the gate. Sliding gates are made from 1 5/8” or 1 7/8” diameter frame work. For security, barbed wire or barbed tape can be added to all types of gates. Commercial single and double drive gates are usually welded, but can also be made with gate ells. In area where snow and ice are a problem cantilever gates a generally used.
A cantilever gate is 1.5 times the length of the gate opening and is suspended by four malleable rollers, which are attached to two posts. Rollers are attached to the gate and first line post, one at the top and one at the bottom of each post; this allows the gate frame to slide between the rollers. Cantilever gates are very heavy and are usually installed on 4” diameter posts and constructed from a 2-3/8” diameter top and bottom rail. We also handle a complete line of residential and commercial gate operators that can be used with any of the gates mentioned.